WIS module primary NDP-KE2-8E2 - фото 1 - id-p95199934

Характеристики и описание

Описание оборудования
Inductive transmitter system
Nominal ratings
Operating voltage	24 V DC ± 10 %
Number of signal channels	8
Signal transfer direction	from secondary side to primary side
Reverse polarity protection	reverse polarity protected
Current consumption	max. 1000 mA
Functional safety related parameters
MTTF_d	245 a
Mission Time (T_M)	20 a
Diagnostic Coverage (DC)	0 %
Indicators/operating means
Switching state	8 x LED, yellow
Transfer indicator	LED, green
Input
Number	1
Input type	Activation input signal level: ?15V = active, ?3V inactive
Input current	? 1 mA
Internal resistor	? 15 k?
Output
Output type	1 Status output (high with proper transfer) and 8 Switch outputs PNP, NO. (switched high) , overload and short-circuit resistant
Voltage drop	? 2.5 V
Load current	max. 50 mA
Response time	? 200 ms ( static operation , the transmission heads stand opposite to each other )
Compliance with standards and directives
Directive conformity
Approvals and certificates
CCC approval	CCC approval / marking not required for products rated ?36 V
Ambient conditions
Ambient temperature	0 ... 50 °C (32 ... 122 °F)
Storage temperature	-25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Degree of protection	IP20
Material
Installation	DIN rail mounting
Mass	106 g
General information
Note	Maximum cable length between WIS module and WIS transmitter must not exceed 5 m.